|
|
Garage with Fuel Station
Borkesz, Michael ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
Bachelor thesis presents the structural design of a load bearing steel structure of garage with roof construction of adjoining fuel station. The object is located in periphery area of Uherske Hradiste city, near Jarosov district. The ground plan dimensions are: 36 x 32 meters garage hall; 20 x 20 meters fuel station roofing. Heights of both construction tops are same – 10 meters above the surface. As the main material supporting elements was designed steel S355. The main supporting structure compose of trusses, which are hinged supported by columns. The roof deck is heat insulated, supported by purlins. The wall deck is simillar to roof deck, except of the front wall, which is partly composed of glass casing. At the both sides of garage hall are designed gates for vehicles. The roof deck of fuel station roof construction composes from one single trapezoidal sheet, also supported by purlins. The work contains structural design of individual elements, including mutual joints and anchoring. Calculations are performed according to standards of EN.
|
|
|
Steel Load-bearing Structure of administrative building
Kašíková, Anna ; Barnat, Jan (referee) ; Bajer, Miroslav (advisor)
The thesis deals with the design of the load-bearing structure of an office building in Olomouc. The ground plan dimensions of the hall are 36 × 36 m, the height of the main nave is 17 m (4 GF), side 10. 7 m (3 GF). The spatial beam structure is formed by symmetrical transverse frame links in one direction, in the other direction by horizontal hinged elements. The roof structure is made of truss girders pin-supported on pillars at the main nave, and a flat roof beside the nave. The pillars are placed on the joints and spatial rigidity of the structure provides system of space bracings. The main material is S275.
|
|
|
Exhibition hall steel structure
Selyvonenko, Ivan ; Pilgr, Milan (referee) ; Brosch, Petr (advisor)
The subject of the diploma thesis is the design and structural analysis of an exhibition hall. The building is located in Brno city. The dimensions of a floor plan are 121,8 m x 66,5 m, the height is 17,75 m. The load-bearing structure consists of arched truss girders, which are pin-supported by fixed columns. The distance between main trusses is 8,7 m. The supporting part of the roof deck consists of solid-purlins. Spatial rigidity of the structure is ensured by cross bracing and longitudinal bracing. All structural members are made of rolled steel profiles and are designed according to current ČSN EN standards. Steel S355 is used as the construction material. This thesis consists of structural design report of main load bearing elements including connections design and drawings.
|
|
|
Cast-in-place tank of sewage plant
Čožík, Martin ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The thesis deals with the design and assessment of monolithic reinforced concrete structures tanks and wastewater treatment plants in accordance with applicable standards and drafting drawings. The tank is divided into individual solved parts: base plate, walls and ceiling plate. These parts are designed according to the ultimate limit states and serviceability. Resolves an assessment of the foundation structure according to the second geotechnical categories.
|
|
|
The building, Přístavní street, Praha 7
Degr, Luboš ; Sedlák, Radek (referee) ; Beneš, Petr (advisor)
The subject of this Diploma Thesis is newly built polyfunctional building in the Prague – Holešovice. Building land is slightly sloping. The building will be followed by the surrounding buildings. The building consists of seven floors. The floor underground technical spaces and collective garages. On the ground floor are two commercial spaces and reception. In the second to fifth floor are office space. The top floor is a penthouse with terraces. The building is designed as a monolithic reinforced concrete skeleton accompanied by a facade wall and the wall forming the core. The core consists of a elevator and a staircase. Floor slabs is continuous reinforced concrete slab with capitals. The façade of the building is divided by pilasters, stone cladding. Root at the penthouse is composed of a terrace with vegetation. Ground floor consists of shop windows with sun screens. All designs are in accordance to the valid ČSN code.
|
|
|
Roof structure of construction for social purposes
Bašista, Ján ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The work treats the static recalculation of an existing roof structure of a construction for social purposes and proposes two variants of the design of a new roof structure. The construction has a rectangular ground plan of 30 m x 47 m and the roof structure is placed on the load bearing circumference concrete walls. Except for the load constituted by the function of the construction and by the climatic area, an extra load of 2 tons suspended at any place of the structure is considered because of the special requirement of working and technological equipment. The variant no. 1 is designed from the steel S355. The variant no. 2 is designed as a combination of the wood GL24h and the aluminium EN-AW 5083. Both of the variants have 11 transverse load bearing girders. The purlins are perpendicular to the girders and are placed on them. Stiffness is secured by roof stiffeners.
|
|
|
Design of the Flat Plate Slab
Krejčová, Jana ; Šulák,, Pavel (referee) ; Švaříčková, Ivana (advisor)
Bachelor thesis describes the design and assessment of monolithic concrete, locally supported roof structures of parking place and ramp, elaboration of shape and reinforcemenet drawings of selected structural element. The work also includes the teoretical part dealing with measures for buildings located in the gap. Calculation of internal forces was performed by komputer program SCIA Engineer in two different models. It was control by simplified method of summary moments and results were compared.
|
|
|
Harmonies
Mucha, Petr ; Suchánek, Jiří (referee) ; Gabriel, Michal (advisor)
The Monade sculpture from a series called Harmonies is a 350 cm tall steel object made of welded metal plates, representing harmonic intervals applied to idealised proportions of the human figure. The impetus is a need of transcendency and meaning in perception of reality. Creative strategies are reduction, abstraction and remediation.
|
|
|
History of Iron and steelworks Třinecké Železárny
Niemczyk, Roman ; Němec, Karel (referee) ; Věchet, Stanislav (advisor)
The bachelor´s thesis is a technical summary and it is describing the history of Třinecké železárny since its creation in the 1850s to the present. The history of iron processing is briefly described. Furthermore, the thesis focuses to manufacturing process of Třinecké železárny and also to iron and steel production technology. At the last part are decribed typical products of Třinecké železány and future prospects of ironworks.
|
|
|
Modern Materials for Automotive Industry
Vaníček, Jan ; Fojtášek, Jan (referee) ; Hejtmánek, Petr (advisor)
This work is focused on the description of conventional and unconventional materials that are used to build a car. Individual types of materials are sorted according to their application and characterized in terms of properties and real use. The end of each chapter is devoted to possible future trends.
|
guest ::
